DIY Ball Jar Light Fixture

January 16, 2015 DIY Projects 0 Comments

January is probably my least favorite month of the year, or at least it used to be. I don’t like to slow down and January always seems to know how to mess with a girl’s schedule. The snow, the boots, the general I don’t want to leave the house mood! But as I get older, I’ve begun to embrace the slower pace of January. Being at home isn’t boring, it’s actually nice, and it gives me to time to work on all those DIY projects I’ve saved countless screen shots of. Here is one of those quick and easy projects for you to try!

I want preface this DIY Ball Jar Light Fixture how-to with a nod to my amazing hubby Luke. He was the brains behind this project, and he’s my general handyman on every project. Luke you’re the best babe!

Alright, with my acknowledgments out of the way let’s get down to the details.

*Supplies Needed:
  • Ball Jar (I love the blue ones) with lid
  • Edison bulb, or some other clear, open filament bulb
  • Pendant swag kit, with extra shade holder ring (see link below for what we used)
  • Drill
  • Hammer
  • Hole saw drill bit (buy this after you have your pendant fixture, so you know what size hole to drill)

This is a pretty quick project. First you need a hanging pendant light fixture. We found a very cheap option ($9.99) at Cost Plus World Market.

The only catch with this particular fixture and project is that you need and extra piece that doesn’t come in the kit. You need an extra one of these rings with the grooves on it. You need this so you can secure the lid from the top and bottom. These pieces are on all the light fixtures at Cost Plus, and we just asked for a few extra from broken lamps or floor models. Worst case scenario, you’re going to need to buy two fixtures.


Screen Shot 2015-01-16 at 4.29.11 PM

Lid. If you have a vintage ball jar like mine there is glass on the inside of the lid. You must break out the glass that is on the inside of the lid with a hammer. Then, you need to drill a hole in the center of the lid with the drill and hole saw bit. You need a fair amount of downward pressure to make this hole, so drill it over a flat, stable piece of scrap wood. After drilling the hole there is bound to be some sharp edges. To deal with this, we ran the edge of a screwdriver along the edge to dull it just a bit. In the finished product, the sharp edges will be covered with the fixture anyway.

Assembly. The swag kit couldn’t be simpler. Just make sure you install a holder ring on both the inside and outside of the lid. This allows you to then hang the jar directly from the lid. Once your lid and the fixture are connected put in a light bulb, screw the jar onto the lid, plug it into the wall, and you’re DONE! Our light hangs out on the three season porch and creates some nice mood lighting over our little bistro table.


*Safety note: this method should be plenty safe for occasional use. However, there is no breathability for the bulb inside the jar. Therefore, I wouldn’t use more than a 40-60 watt bulb. And, I’d never leave this fixture on for extended periods of time, so make sure to turn it off if you’re leaving the house/area.

Let me know if you give this a try. I think clustering several clear jars together would look awesome!


Colorful & Modern Kitchen Decor Update

January 10, 2015 Interior Design 0 Comments

I’m working with a client who has recently moved into their first single family home and it’s three times the size of their past condo. This is fabulous for their growing family, but tough on the pocketbook. That’s a lot additional space to decorate!

The house is new build construction that is fresh and clean. It has excellent fixtures and cabinetry, but the space is painted boring builder’s beige…EVERYWHERE! This might be a nice option for the color averse (and good for home staging/selling), but it’s a decorator’s dilemma – especially with a narrow open concept layout and a tight decor budget.

The client’s have a great modern sensibility and are ready to inject some color into their space. The first spot in the house we need to make more functional is the kitchen and eat-in dining area. You can see some of the first level floor plans from these rough scaled computer renderings. In the first view, you’re looking straight into the center of the first floor. The living area flows directly into the kitchen and eat-in dining area, which can be viewed more easily in the second rendering. (These are basic space/furniture plans. The items placed in the rendering are place holders for the final pieces that will be chosen).

kitchen design board

Interior view as if you were looking straight through the front of the lower level of the house.

kitchen space planning

Interior view of the kitchen. Cabinetry is not picture, just roughed in.

The family loves blue, and it’s an easy color to pair with different accents to create the feeling of separate spaces on the first level. It also worked with their existing living room couch. To save on costs, we decide to paint some focal walls instead of using multiple paint colors on the first floor. This creates a nice effect from the living room, where you can see both blue focal walls together. (More on the living room design in a future post).

The wall color is Naval by Sherwin Williams. The next step was to find affordable and family friendly furniture that wouldn’t break the bank. Naturally, we turned to IKEA. Another local (and national) recommendation is FLOR. Their carpet tiles hold up very well and are easy to swap out if damaged or stained – perfect for under a dining table! Here’s the final design board for kitchen area.

kitchen design ideas

See the links below for product information.

We chose a dark table, which as extendable leaves for holiday gatherings. I paired the table with a lighter chair, and a colorful rug with blues, browns, blacks and a pop of yellow, which is our main accent color for the first floor. We also chose a similar, but not matching FLOR tile runner to run along the kitchen alley way. Mod bar stools and a Danish inspired floral complete the look.

Budget Friendly Tips to Consider:

  • As I mentioned above, painting a focal wall saves time on materials and labor. It’s not usually my first choice, but it’s certainly a good option – especially if you won’t be doing the painting and need to hire out.
  • Save on shipping costs! Ordering the rug and floor runner from the same retailer saves on shipping from multiple locations. Also, while one trip to IKEA may seem impossible, but knowing everything you need, having a list and item numbers will save you time, and probably money (if you stick to your list!).
  • Add custom touches by spending a bit more on smaller items such as the curtains, light fixture, and plant life in this case.
  • If you can DIY, give try it! The home owner tried making her own no-sew roman shades and they turned out great!
no sew roman shades

One of the lovely no-sew shades!

Excited to show you finished photos from this space, we will probably wrap up later this summer. There are many rooms being worked on little by little. Let me know what you think. What are your go-to places for affordable furnishings?

XO – Claire

Perfect Palette: Color Inspiration

Hello there,

I hope everyone had a lovely holiday celebration, and got a special gift you love! I have been inspired by one of my Christmas gifts to start this new post category – Your Perfect Palette. I sent my mom about ten Amazon links for design books I’d like as Christmas gifts (another post with design and styling book recommendations coming soon), and she was going to pick a few books to surprise me with. I was really crossing my fingers for The Color Scheme Bible, by Anna Starmer, and I got it! Hence this new blog series has been born!

The book is chock-full of unexpected, inspirational color combinations, and tried and true color rules such as, green can often be used as a neutral to balance a space – especially softer shades of green. Another good tidbit – all reds go together, as do all pinks. And soft oranges almost always feel warming.

Now, I am usually a believer that all rules are meant to be broken, but it’s nice especially when you are learning to have some guidelines. So, with each Perfect Palette post I’m going to focus on one unique color combination, and a room where this palette might look fabulous in your home. This week is all about a BOLD bathroom and contrasting colors.

When you contrast dramatic colors, your end result often creates an energetic environment. And I don’t know about you, but I could certainly use a jolt of energy each morning, as I groggily step into the bathroom.

In this bathroom, the main wall color is a bright marmalade (or orangey-red). The butterfly image is perfect for color inspiration, or could be blown up and used as artwork. When working with bold colors remember to keep decoration to a minimum. The colors are doing a lot of work, so you don’t need to add lots of artwork or extraneous decor.


This is Valspar Marmalade Satin Interior paint.


The main accent colors are mint, turquoise, and deep red (think blood orange or ruby red). You might think that red and orange clash, but here they are similar enough in tone and saturation to work together. The cools blues serve as the perfect accent to balance all the warm orange, and then the deep red highlights the orange – injecting an even hotter and energetic color into the space.


Earthy yet dramatic lighting fixture.

Lush red towels feel regal.

Lush red towels feel regal.


bathroom tile

Ultimate gorgeousness in turquoise shower tiles!

blood orange vase

Perfect accent decor with flowers, or as is.

Silver seemed like another perfect highlight for lighting fixtures or mirrors, and I felt the imagery was beginning to take me to Morocco. I continued on that theme with a few ornate mirror options.

moroccan mirror moroccan mirror silver

And there you have it! A BOLD and ENERGETIC bathroom that feels like a trip to Morocco each morning (haha, a girl can dream, right?)

XO – Claire

color palette for moroccan bathroom

Elegant & Eco-Friendly Holiday Table Decor

Christmas and New Year’s Eve are just around the corner. If you’re having guests over, and ready to stray from the typical poinsettia you might like my elegant and organic tablescape idea! It’s easy to create a show-stopping table setting with items you have on hand, by simply adding greenery and fruit into the mix.

The added bonus of table decor like this (or the endless variations possible) it that everything is reusable and organic – no paper goods or silly plastic decorations to throw away. My florist friend Kate of Fleur Du Jour first inspired this idea when we discussed the idea of creating a table runner out of greenery. This was the inspiration photo:

image via

image via

Here’s what you’ll need:

  • Dishware – dinner plate and salad plate
  • Silverware
  • Stemmed glassware
  • Cloth napkins
  • Greenery (about 25 stems – I ordered mine through a local florist)
  • Fruit (1 per/person)
  • Candle Pillars / candles
holiday table decor items

A few items on my table included this Nambe Dinnerware in Butterfly Marble Swirl – smoke color (purchased at Macys), Convivial Production Candle Pillars, and Napkins from Dot & Army ( both found on Etsy).

Step 1: Assess the length of your table and how much greenery you’ll need to create a runner the length of your table out of the branches (20 – 30 stems should be plenty). I used a combination of olive branches, blueberry cedar, and rosemary. You can use whatever is in your backyard! Pine, cedar, and holly berries would be a classic holiday combination.

herbs used for table decor

Step 2: Place your candleholders along the length of your table. Arrange the branches in an organic way, creating a table runner out of the greenery. Try to mix and layer the different branches.

how to layer table greenery

Step 3: Begin to set the table layering plates and napkins. Make sure your place settings are correct! The fork goes on the left and the knife, spoon, and wine glass on the right.

Step 4: Add a piece of fruit to everyone’s plate. I used a small orange (playing off the tradition a Christmas orange), but you could choose pears, persimmons, pomegranates, or even figs – just use the same item on each plate to bring cohesion to the table. You could also add place cards at this stage if you choose.

greenery as table runnerhow to decorate a organic holiday table table with greenery runner


Step 5: Light your candles, turn down the lights, and wait for guests to ooh and aah over your gorgeous table. You can even let guests take a branch or two as a party favor – especially if they are usable herbs like rosemary!

Hope you give this one or a similar variation a try! Let me know what your favorite greens and fruits turned out to be.

XO – Claire

Oak Park Living Room Transformation

Woohoo! I have my first before and after project to share, and this room was a dream to decorate. This living room was a total blank slate, and my clients were very trusting of my recommendations once we talked through the color scheme and styles. Below are some before photos (old furniture was all donated, there was not much but a rug and couch).

Sarah and Steve had moved into a gorgeous prairie style Oak Park residence (designed by E.E. Roberts) about two years ago. They have two young girls, so decorating the formal living room was not really a priority upon moving in, but with the holidays quickly approaching they were ready to get the space updated and ready for family and friends!



The room had great bones. Lots of symmetry and beautiful wood to work with. The fireplace and radiator covers were looking a tad tired, but after some debate we decide to leave the historic elements of the home untouched. Main considerations for the decor included the following:

  • family friendly space for playing games and reading
  • contemporary/modern feel that still blends with more traditional aspects of the house
  • nod to the industrial history of Chicago
  • rustic wood and steel elements
  • leaving the wall opposite the fireplace empty for a future piano!

With these creative considerations in mind here are some of the design decisions I made:

  • darker walls to ground the room and create a masculine/modern feel
  • accents of pecan colored wood and ivory velvet drapery help balance the dark wall color
  • steel/industrial accents in the lighting and furniture
  • coffee table with ample storage for game night
  • comfortable and affordable furniture for the growing family
  • we used a pop of color in the chairs, which the easiest item to re-cover if you grow bored with the fabric over time
  • black metal picture wall/gallery to showcase family photos in a contemporary way (black and white photography adds to the modern feel)

Here are a few after shots. You can see the full portfolio here.

Claire Interior Shoot-Web-JTP_3171Claire Interior Shoot-Web-JTP_3184modern living roomClaire Interior Shoot-Web-JTP_3174 modern living room

Here’s the lovely review Sarah and Steve wrote about working with Centered By Design. I think we are going to do their family room next!

“Claire was amazing to work with. She has a great sense of style and took us through the entire process of turning a living room that had sat empty for two years to a space that we now use all the time. We were initially struggling to balance the character of our century-old home and our more modern tastes. Claire helped us to first clarify our overall design aesthetic and vision for the project, before working with us on turning that vision into a reality. Her work encompassed all aspects of the project; from setting a budget to picking fabrics and colors, as well as styling the finished project. Claire is very easy to work with. She balanced keeping us focused on the project, while respecting our need for time to reflect on certain key decisions. Claire was also very respectful of our busy schedules and, just as importantly, our budget. The final result is a space that reflects our personal style and that we love to spend time in with our family and friends.” Sarah & Steve – Oak Park

XO, Claire

Branding Your Small Business

December 1, 2014 Tips + Resources 1 Comment

Hello, I’m so excited to welcome you to the Centered By Design blog! I’ve spent the past six months developing my personal brand and business. I thought a fitting first post would be to explain and demystify this process. I think anyone can brand themselves or their small business idea. I’d love to share with you the insights I’ve learned during this process.

I am certainly not a branding expert, but I have a work history in marketing that includes brand management for notable organizations with strong brands, such as Habitat for Humanity and REI. I’m fascinated by the idea that our typography, color choices, tone, and messaging can have such an impact on how people perceive and respond to our brands.

Here is a mood board sample, which I created to help communicate the “feel” of my brand to the graphic designer creating my logo. I think whether digital or analog, getting your ideas and inspiration into a cohesive visual statement is important.

Step 1: List five adjectives that will help you define the tone of your brand. Then search for imagery in magazines, on Pinterest, or the web and create your mood board. My adjectives were Artistic, Organic, Down-to-Earth, Clean and Calming. I added my final logo into the board after the fact – but the brilliant part is that it looks like it was a part of the board all along! Arriving at a final design is not easy. It took three design rounds to get the logo right. See below for an earlier iteration (there were at least 20!). This is why it’s so important to define your tone. You can’t get side tracked only by what you respond to visually. You need to make sure that what you are creating represents what you are saying your brand represents. It sounds easy, but it’s kind of hard!

  • Side note on creating a mood board. Don’t be intimated by fancy ones, just ripping pictures out from a magazine or creating a new Pinterest board is perfect! If you want to learn exactly how I did this board in Photoshop, you can take a Skillshare class. It was a little bit complicated at first, but it’s a skill I’m glad to have.
mood board branding template

Mood boards are a quick way to visually communicate!

Screen Shot 2014-11-07 at 4.56.31 PM

Here’s an earlier logo iteration. I loved the hexagon and font, but it did not aline as well with my brand message. It was deemed to bold and sharp.

Step 2: I encourage you to expand on your brand identity by writing a Creative Brief. This is simply a one-page document that further expounds on aspects of your brand. Sometimes it helps to write in the third person. Imagine you were trying to explain the brand/business to someone you’ve never met. You could include categories such as your background, company objective, target audience, market competitors, distinguishing characteristics, and other creative considerations. This information will not only help your graphic designer, but it can serve as a reminder to help you stay consistent/connected with your brand. Here are some examples from my brief:

  • Distinguishing Characteristics:

    • Background in the arts means Claire has an appreciation for handmade and artisan touches.

    • Claire is a unique combination of highly organized, entrepreneurial, creative, collaborator, down-to-earth, and calming presence.

  • Creative Considerations:

    • The color wheel is very inspirational to Claire, and the circle could also represent being “centered” to a client. Claire believes good design can make you feel more centered, more comfortable in your space, and happy too! Would be great for the graphic designer to explore ways to work the color wheel into the logo. Claire likes the painterly quality of the image she submitted.

Step 3: Get a few select outside opinions. When you are really close and connected to something it’s hard to be objective! Talk to a few people you trust, preferably people with graphic design or branding experience to see if what you’re saying resonates with them. Look for resources online, at your local community college, or entrepreneurial hub for classes or presentations to aid you in the branding process.

Okay – I hope this gets you started in the right direction! What do you think? Anything that I’m missing? Any branding experts out there who’ve got more tips?

Thanks for reading! I’m so excited my first official blog post is DONE.

XO, Claire 

How to Refurbish a Vintage Clock

DIY Project – Repurposing a George Nelson inspired clock in six easy steps. I originally wrote this post for  they are a great online resource for vintage furniture and decor. Kind of like a craigslist, but primarily for home stuff!

Clocks are pretty underrated in the realm of home décor. You never hear anyone mention how much they need a clock. But next time you see a working vintage clock – think twice, that baby may have some serious potential on your wall! Mid-century modern décor is quite on trend at the moment (if you haven’t noticed you might be living under a rock). This is excellent news, because clocks from that era are in abundance at vintage shops, grandparent’s basements, and sites like Krrb. If you see a clock with lines you love, snatch it up, and then proceed to refurbish it in these six easy steps.

Tools/supplies needed:

  • clock
  • screwdriver (phillips and flathead)
  • spray paint
  • sand paper

Step 1: Disassemble the clock. On the back of this clock, there were a few long machine screws holding everything together. After removing these, it was just a matter of prying apart all the various pieces that needed painting/repair.

Step 2: It’s a good idea to snap a picture with the case open so you remember how everything fits together.

Step 3: Separate the clock face and glass from everything else and thoroughly clean the glass, and dust inside of clock. Bend any of the metal arms back to true.

Step 4: Gather your spray paint, sand paper, and head outside!

mid-century vintage clock

Step 5: Give the clock a light sanding to chip away any old paint or flaking metal. This step will help the spray paint adhere better too.

Step 6: The clock mechanism itself was working and the electrical cord was in fine shape on this project. The cord could have been replaced, but there was no need. It was dirty, though, so I took time to paint the visible section with the same paint from the wall it was to be mounted on. An easy fix to make the cord blend into the wall.

mid-century vintage clock

DONE – Reassemble and hang that baby up!

XO, Claire